Since 1957, UNIST has been writing the book on non-friction. They continually develop Micro-Fluidization systems so you can lower the cost and volume of lubrication in your cutting, forming and stamping operations. Their revolutionary lubrication systems avoid the need to flood fluid on machining and cutting hot spots. Much to the customers’ satisfaction, the system not only reduces how much lubricant bought, but also reduces the downstream costs of cleaning it up, treating and disposing of it. We recommend these systems for anyone looking to control their coolant usage and cost effectiveness.

Don’t forget your Misting Fluids!

uni-MAX® Saw Lubrication System

uni-MAX® Saw Lubrication System with a 3-Outlet BAT Nozzle improves life of band or circular blades

This is our top seller!

  • Produces a continuous output of precisely metered lubricants. Variable-rate pulse generator allows for automatic, infinite repeat cycling of the metering pump from a single, dry filtered air source.
  • Adjusts output from 4-200 injection cycles per minute. Delivers 0.1 to 3.0 drops of lubricant per cycle. Standard 16-ounce reservoir holds more than 14,400 drops of lubricant.
  • Dispenses any highly refined lubricant including UNIST’s high-efficiency Coolube.
  • Lubricates the teeth and both sides of blade simultaneously. Applies a thin film of lubricant that prevents friction build up, maximizes saw productivity and blade life, reduces fluid consumption and produces near dry, easily recycled chips.
  • Lets operator easily control output by adjusting air, pulse per minute and liquid metering.
  • Extends blade life.
uni-MAX® Coolubricator System

uni-MAX® Coolubricator System delivers precise, continuous lubrication

  • Produces a continuous output of precisely metered lubricants. Variable-rate pulse generator allows for automatic, infinite repeat cycling of the metering pump from a single, dry filtered air source.
  • Adjusts output from 4-200 injection cycles per minute. Delivers 0.1 to 3.0 drops of lubricant per cycle. Standard 10-ounce reservoir holds more than 9000 drops of lubricant.
  • Dispenses a wide range of fluids (viscosity up to 20,000+ sus) including UNIST’s high-efficiency Coolube from its durable, 10-ounce (0.3 L) vented reservoir.
  • Combines lubricant and air in the patented co-axial nozzle tip. Keeps atomization and distribution of the liquid consistent regardless of the hose length. Nozzle is coupled with 5-foot co-axial hose and comes with a magnetic base for easy relocation and positioning at friction points.
  • Adjusts air and liquid output easily.
  • Offers choice of actuation valves: manual sleeve valve, electric solenoid or air pilot. This facilitates simple integration to your processes and equipment controls. read more.
  • Creates a cleaner, safer work environment.

uni-MAX Coolubricator recommended for:

  • Metal cutting, machining and stamping
  • Plastic cutting and machining
  • Wood cutting and machining
  • In-die lubrication
  • Chain lubrication
Portable uni-MAX® Coolubricator Jr.

Portable uni-MAX® Coolubricator Jr. lets you lubricate machines throughout your shop

  • •Moves from machine to machine without production delays. Hand-carry this versatile lubricator from one scheduled cutting or machining equipment to the next. A heavy-duty magnet lets you install it with minimal downtime..
  • Produces a continuous output of precisely metered lubricants. Air-driven, positive-displacement pumps precisely meter each drop of lubricant at .03 cc/stroke. The 100-million cycle pulse generator allows for automatic, infinite repeat cycling of the metering pump. This ensures that a continuous, external film of lubricant is applied to the tool-work interface.
  • Adjusts output from 4-200 injection cycles per minute with 0.1 to 3.0 drops of lubricant per cycle. A durable, vented 16-ounce reservoir holds more than 14,400 drops of lubricant.
  • Dispenses any highly refined lubricant including UNIST’s high-efficiency Coolube from its durable, 16-ounce (0.5 L) vented reservoir.
  • Combines lubricant and air in the patented co-axial nozzle tip. Keeps atomization and distribution of the liquid consistent regardless of the hose length. Plastic 12-inch nozzle is coupled with 5-foot co-axial hose. A heavy-duty magnetic base at the hose/nozzle connection makes it easier to relocate and position the nozzle at the friction points.
  • Lets operator easily control atomization of the spray by adjusting air, pulse per minute and liquid metering.
  • Installs fast and easy with manual on-off (sleeve). read more.
  • Provides small shop economy. See how this portable lubricator can lead to BIG lubricant savings and better quality products

uni-MAX Coolubricator Jr recommended for:

  • Drill presses
  • Lathes
  • Saws
  • Open milling machines
  • Boring mills
  • Works with metals, woods and plastics
uni-MAX® Serv-O-Spray Systems

uni-MAX® Serv-O-Spray Systems for intermittent output

  • Operates with iIntermittent air signal . Add any amount of air to atomize the liquid lubricant. An air metering screw controls the flow of air out the nozzle. Lets you adjust spray density and distance. One shot of lube per cycle.
  • Adjusts output from manual to 200 injection cycles per minute. Delivers 0.1 to 3.0 drops of lubricant per cycle. Standard 10-ounce reservoir holds more than 9,000 drops of lubricant.
  • Dispenses any highly refined lubricant including UNIST’s high-efficiency Coolube.
  • Combines lubricant and air in the patented co-axial nozzle tip. Keeps atomization and distribution of the liquid consistent regardless of hose length. Nozzle is coupled with 5-foot co-axial hose and comes with a magnetic base for easy relocation and positioning at friction points.
  • Lets operator precisely direct spray. Spray output is at an angle approximately 11-18 degrees based on the amount of air introduced into the system. Operator controls area covered by increasing or decreasing the air and liquid controls.
  • Offers choice of actuation valves: none, solenoid or air pilot for electrical or pneumatic operation.
  • Matches your application. UNIST engineers will show you how to get better cutting and in-die lubrication

uni-MAX Serv-O-Spray recommended for:

  • Supplemental and spot lubrication
  • Single or multiple spindle drills and taps
  • In-die lubrication
uni-MAX® Single Line System

uni-MAX® Single Line System for operations requiring a more compact, economical system

  • Modular, compact design offers an economical lubrication system.
  • Produces a continuous output of precisely metered lubricants. Variable-rate pulse generator allows for automatic, infinite repeat cycling of the metering pump from a single, dry filtered air source.
  • Output adjustable from 4-200 injection cycles per minute. Delivers 0.1 to 3.0 drops of lubricant per cycle. Standard 10-ounce reservoir more than 9,000 drops of lubricant.
  • Dispenses any highly refined lubricant including UNIST’s high-efficiency Coolube.
  • Air and liquid lubricant combine in air chamber to create a lubricant spray dispersed through 1/8-inch OD, 10-foot nylon tube. This tube is positioned by a 1/8-inch OD semi-rigid copper nozzle that precisely directs the spray at the cutting tool or work piece. Comes with a magnetic base for easy relocation and positioning at friction points.
  • UNIST Variable Orifice Tip (VOT) provides proper lubricant velocity and consistency for continuous application.
  • Operator easily controls output by independently adjusting air and liquid delivery.
  • Choice of actuation valves: manual, solenoid or air pilot for manual, electrical or pneumatic operation. Read more.
  • Start saving now. See how the economical uni-MAX Single Line System can help you control lubricant costs

uni-MAX Single Line recommended for:

  • Metal cutting, machining and stamping
  • Plastic cutting and machining
  • Wood cutting and machining
  • In-die lubrication
  • Chain lubrication
  • Use on metals, woods and plastics
Portable uni-MIST System

Portable uni-MIST System prevents friction build-up in higher RPM tools and rapid stock feeders

  • Optimizes cooling effect of water-soluble lubricants with low volume/low pressure (LVLP) system. uni-MIST finely atomizes water-soluble lubricants with just enough air to quickly evaporate and optimize the cooling effect at the tool/workpiece interface. You can also spray straight oils, including UNIST’s high-efficiency Coolube™ lubricants.
  • Reduces fogging and overspray problems that occur with many siphon or suction-type mist systems.
  • Sets up easily from one machine to the next. Portable uni-MIST system installs in minutes. An optional, chrome-plated magnetic mounting base lets operator easily relocate the metering block for precise application of spray.
  • Creates the exact atomized spray you need for your application. Coolant/lubricant moves to the nozzle tip under low pressure (15-30 psi). Operator precisely controls the mix of compressed air and liquid in the nozzle chamber.
  • Offers choice of manual or automatic operation. A manual control, on-off piston comes standard to precisely and constantly dispense lubricants and air.
  • Or add an optional solenoid or air pilot valve for automatic operation. The uni-MIST system will automatically operate or shut down with the tool’s normal operation. Valves control both air and liquid shut-off and operate instantaneously when a control signal is supplied. Both the solenoid or air pilot valve can control up to six, simultaneously in-use nozzles.
  • Offers choice of patented co-axial nozzles for precise fluid dispensing. uni-MIST comes with a 12-inch, semi-rigid copper co-axial nozzle and 5-foot tube so you can position the spray on the tool/workpiece interface. Flexible nozzles are available in armored steel or flexible plastic that is highly resistant to machine vibrations.
  • Lets you work in a fog-free environment. See how you can improve your lubrication and your work conditions.

Contact Us

We are located in Southern California.

About Us

We are a small family orientated distributor, who proudly treats customers like our own. We believe that business should be done in an honest and respectable manner. Giving more than just a product when you buy from us. We gladly offer our knowledge and help along with everything we do.
© 2014 SC Industrial Inc. - All Rights Reserved