M42-Maxima-Sprint

Engineered for:
Long chipping steels
Rust and acid-resistant steels
Titanium base alloys
Special bronze
Copper base alloys
Nickel base alloys
Exotic, difficult to cut alloys
Solid material of medium sections

Superior, because:
Tooth tips of HSS M42 / material no. 1.3247
The special designed variable tooth with an extremely positive rake angle cuts aggressively in tough materials resulting in a clean, smooth surface. Reduced cutting forces and easy chip formation.

M42-Profiler-Sprint-VS

Engineered for:
Medium to large H-beams

Superior, because:
Tooth tips of HSS M42 / material no. 1.3247
The new designed special HL variable tooth with slightly positive rake angle and heavy group set shows excellent performance on H-beams and similar shapes. The PROFILER-SPRINT-VS avoids pinching in beams with inside tension, or in poorly supported profiles. For 90° and miter cutting.

M51-Sprint-Plus

Engineered for:
Steels up to 1700 N/mm2 tensile strength
Austenitic stainless steels
Nickel-based alloys
Titanium and special bronzes
Solid material of medium dimensions
Heavy wall tubing

Superior, because

Tooth tips made of HSS M51 / material no. 1.3207
The extremely positive variable tooth with special strong tooth forms. High heat and wear resistance of HSS M51 tooth tips increases band life on all hard and problematic steels.

M51-Taifun-Maxima

Engineered for:
Steels up to 1700 N/mm2 tensile strength
Austenitic stainless steels
Nickel-based alloys
Titanium and special bronzes
Solid material of medium dimensions

Superior, because:

Precision borazon-ground tooth tips made of HSS M51 / material no. 1.3207
The variable tooth with extremely positive rake angle in connection with the ground tooth geometry and a variable group set generate a superior chip distribution. Chamfered raker teeth grant excellent band guidance at lowest vibration. Tooth tip hardness of approx. HRC 69 increases the life time for better cost-effectiveness.

TC-Black Line

Carbide Tipped Band Saw Blades with triple chip tooth geometry for cutting solid steels.

Engineered for::
-Titanium
-Stainless steels
-Nickel alloys
-Heat resistance steels
-Exotic, difficult to cut alloys
-Solid materials in medium and large sections

Superior, because:
Carbide tips welded to the blades back by latest technologies. Carbide teeth precision ground in triple chip geometry for fastest cutting rates at minimum vibration.

VC-Silver Line

Carbide Tipped Band Saw Blades with multi chip tooth geometry for cutting solid steels and non-ferrous alloys.

Engineered for:
Solid bars in medium and large sections
Stainless steels
Special alloys
Heat resistant steels
Heat-treated steels
Cold working steels
Alloyed steels up to 1900 N/mm2 tensile strength
Aluminum-silicon alloys
Copper-nickel alloys
Titanium
Ampco
Zirconium

Superior, because:

Carbide tips welded to the blade back with latest technologies and precise ground tooth tips with multi chip geometry allow fastest cutting rates and vibration free operation with optimum tool life.

Contact Us

We are located in Southern California.

About Us

We are a small family orientated distributor, who proudly treats customers like our own. We believe that business should be done in an honest and respectable manner. Giving more than just a product when you buy from us. We gladly offer our knowledge and help along with everything we do.
© 2014 SC Industrial Inc. - All Rights Reserved